Chinachemnet   |   Sign in   |   Join NowDouble Conical Revolving Vacuum Dryer Manufacturers, China Double Conical Revolving Vacuum Dryer Suppliers, China Double Conical Revolving Vacuum Dryer Exporters
  • Region :Machinery and Equipment/Drying Equipment
  • Tel : +86-519-88733198;88675971
  • Fax : +86-519-88673121
  • Email :cnhengbo@126.com
  • URL :www.cnhengbo.com

Details for China Double Conical Revolving Vacuum Dryer

Double Conical Revolving Vacuum Dryer

Category :

Machinery and Equipment/Drying Equipment

Double Conical Revolving Vacuum Dryer
CAS NO :
EC NO :
MF :
MW :
Product description :

Description
  SZG Double Conical Revolving Vacuum Dryer is double conical rotating cylinder. Under the state of vacuum in the cylinder, pass oil or hot water into the jacket to heat. The heat will be connected with damp raw material through inner wall. The evaporated steam after the raw material absorbed heat will be exhausted through vacuum pump. Because the inner of cylinder is in vacuum state and the cylinder make raw material turn over from up to down and from inner to outer, the drying speed is fastened and the drying efficiency is raised, and the purpose of uniform dry can be reached, It is in conformity with the GMP requirement.
  Features
  1、   Due to the vacuum drying, the speed rate is higher under low temperature, it can triple the normal speed, so the energy saving and high heat efficiency can be achieved .This machine is most suitable for heat sensitive materials and materials that are easy to oxidize.
  2、   The equipment adapt advance design, the inner structure is simple, clean easy, material can be taken out entirely, and operate simple.
  3、   The dryer is sealed, the product doesn't lead, damage and pollute This machine is suitable for drying stimulating and poisonous materials.
  Because the materials are dried by mixing drying, the product can has very low water content (≤0.5%) and good uniformity. It can meet different materials’ requirements.
  4、   The machine has a very compact structure, and it covers a small area. so it’s easy to achieve labor intensity-reducing and labor-saving due to the simple operation.
  5、   Users can choose stepless regulating-speed(1-10r/m)or regulating- speed (6-10r/m)
  sketch map

 


  rotary joint map


  Technical Parameters

 

100

350

500

750

1000

1500

2000

3500

4500

volume inside the tank(L)

100

350

500

750

1000

1500

2000

3500

4500

loading capacity(L)

≤50

≤175

≤250

≤375

≤500

≤750

≤1000

≤1750

≤2250

rotating speed(rpm)

3~13

power of motor(kw)

0.75

1.1

1.5

2

3

3

4

5.5

7.5

occupied area
L×W(mm)

2160×800

2260×800

2350×800

2560×1000

2860×1300

3060×1300

3260×1400

3760×1800

3960×2000

rotating height(h)

1750

2100

2250

2490

2800

2940

2990

3490

4100

design pressure inside the tank(MPa)

-0.1~0.15

design pressure of jacket(MPa)

≤0.3

working temperature(℃)

inside the tank≤85 jacket≤140

pump type and power when t condenser is not used(kw)

2X-15A
2kw

2X-15A
2kw

2X-30A
3kw

2X-30A
3kw

2X-70A
5.5kw

JZJX300-8
7kw

JZJX300-4
9.5kw

JZJX600-8
11kw

JZJX600-4
20.5kw

power when t condenser is  used(kw)

SK-0.4
1.5kw

SK-0.4
1.5kw

SK-0.8
2.2kw

SK-2.7B
4kw

SK-2.7B
4KW

SK-3
5.5KW

SK-6
11KW

SK-6
11KW

SK-9
15KW

weight(kg)

800

1100

1200

1500

2800

3300

3600

6400

7500

  note:For raw material, if its volume has great change before and after dry,then its filling cofficient may be increased or decreaded。

Synonyms : no data