PU Footwear Mould Release Agent, China PU Footwear Mould Release Agent, PU Footwear Mould Release Agent exporters, China PU Footwear Mould Release Agent Suppliers

Details for China PU Footwear Mould Release Agent

PU Footwear Mould Release Agent

Category :	Adhesives and Sealants/Silicone Sealants
CAS NO :
EC NO :
MF :
MW :
Product description :	Product Name: PU Footwear Mould Release Agent Item No.: SilibaseMD-4309 Physical Data of SilibaseMD-4309 PU Footwear Mould Release Agent: ● Appearance：Milky white liquid ● PH Value ：Neutral ● force：N/100cm²≤40 ● Working temperature ：40~80℃ ● Dilution ratio (by weight) ：1:20 for polyether and 1:25 for polyester ● Density： 0.98-1.01 g/ml ● Solid content ：30-33% Characteristics of SilibaseMD-4309 PU Footwear Mould Release Agent: ● Reduce build-up on mold surface and control transfer to the molded products. ● Lower scrap rates in molding operations to increase productivity. ● Help to achieve post-processing (adhesion, gloss varnish, paint etc.) Usage of SilibaseMD-4309 PU Footwear Mould Release Agent: ● Spray 3-5 layers for new mold or cleaned mold evenly with the release agent fully covered in mold. ● You can use an air gun to blow-dry the release agent and finally use a clean cotton cloth to wipe the mold. Release agent must be thorough dry before PU injection. ● Every time after releasing the entire mold evenly coated with a fresh layer of mold release agents, in order to ensure good release effect. ● Before doing post-processing, requiring wash by detergent or solvent after demoulding.
Synonyms :	no data