Room temperature normal pressure solidification polymer-metal polymer matching system
This system should have cure reaction in polymer solvent.

Latest polymer type epoxy curing agent products
1, B series epoxy curing agent is room temperature solidification heat resistance curing agent . It is white powder under dry condition.
2. H series epoxy curing agent is moderate temperature solidification heat resistance curing agent . It is red lump under 120and solidification of 2 hours.
3. HE series epoxy curing agent is moderate temperature solidification heat resistance curing agent . It is black powder under 120and solidification for 3 hours.
4. F series epoxy curing agent is high temperature solidification heat resistance curing agent. Epoxy that resist high temperature of 200-500can be used in the above curing agents and can be used in different fields of epoxy.
5. Multifunction epoxy curing agent-SP resin is black thick liquid.
6. TH-50 series reciprocal reaction type epoxy curing agent.

FB heat resistance antiflaming thermoset formaldehyde phenol resin(FB resin) series products
Decomposition temperature of FB resin is above 500, oxygen index:48.5, ablation rate:-0.079mm/s, quality ablation rate: 0.0333g/s. Density:9.3. Free phenol:common grade<10%, war industry grade<7%, gelatin rate: 70-120 seconds/200.
FB88, FB89 are the latest products of high molecular weight and ow free phenol. The molecular weight of FB90, FB100 super high molecular weight products can reach 1500-2000(VPO method) on the clients' requirements.

Products and technology of KJ-2 series quick solidifying adhesive
This kind of products have long operation period. Can be solidified and bonded in water.
1. KJ-2F adhesive is used in quick mend for airstrip.
2. KJ-2D adhesive is used in quick bonding of highway.
3. KJ-2S adhesive is used in the quick bonding of stone.
4. KJ-2L is quick adhesive for leakage stoppage for leakage stoppage .
5. KJ-2K is large-scale tetrahedron adhesive for burst.
6. Quick solidification chemical grouting technology.

GJ series heat resistance ablation resistance clean antiflaming environmental protection type adhesive can resist the high temperature of 200-500.

DJ series heat resistance clean antiflaming insulation paste and DT series heat resistance clean antiflaming insulating paint are used in the bonding, sealing, pouring into etc. in electron and electrical appliance. The following data can be used as reference)s=2x10¹³-1x10¹⁵,v=2x10¹⁵-1x10¹⁶cm, break down voltage =99.4kv/mm. Dielectric loss=(2.2-8.8)x10^-3, <2(10KHz-1MHz)

Special coating
1. T-55 resin expanding fire retardant coating.
2. T-56 radiation protection coating.
3. T-57 water base instant freezing protection coating, Can be used in the protection of human body, vehicle, equipment and environment.
4. T-58 oil field.
5. T-2000 solventliss road signal paint. Working life is 5 to 8 times than that of common signal paint.
6, T-98 series heat insulation ablation resistance, low density, ablation rate is negative. Quality ablation rate is about 0.07g/s.
7. TH-2 flexible ablation resistance coating, solidification in room temperature, ablation rate: 0.12mm/s.

MH-2000 forest fire retardant and fireproof reagent
Nontoxic, flavorless

Give instructions for research and choosing for adhesive joining engineering, crown design and adhesive.

Polymer-inorganic matter mixed system
Nontoxic liquid without peculiar smell. Heat resistance: 500-1300.

Light heat insulation ablation resistance active filling
This filling is brown yellow powder, natural bulk density: 0.2-0.5g/cm3. Can be used in the ablative of epoxy, formaldehyde phenol resin, polyurethane, butadiene acrylonitrile rubber etc. Density can be reached: 0.5-1.0g/cm3, quality ablation rate can be reached 0.03g/s.