SWD POLYURETHANE (SHANGHAI) CO., LTD

     SWD959 Series SH131One component moisture cure polyurethane (rigid) system industrial

   equipment with rust anticorrosion primer

Descriptions                    This primer is special designed for the continuous production enterprises of petrochemical and power generation for application with rusty surface on the non-stop production state. The production equipment, storage tanks, process piping will be severely corrosion for drip and leakage during the production process. It is very difficult to maintain and repair in the production state. In order to solve this issue and control corrosion, extend metal's life, SWD Urethane Co., USA developed petrochemical industrial with rust anticorrosion primer which able to be painted under production with non-stop process. It is the best primer able to treat the surface with rust on the production system keep in working state in the 20^th century. It successfully solution the security problems of derust operation and primer quality control of anticorrosion performance. It has been widely used in the petrochemical enterprises in America.

Characteristics             The primer takes the high performance polyurea polyuretane resin as main material. Film of coating is dense, tough, with comprehensive anticorrosion properties of acid resistance, alkali resistance, salt resistance and various chemical media resistance. In general, it compatible well with the original coatings without blasting and grinding to fresh the metal surface, easy to use and with high adhesive strength. The primer with delay corrosion actions is able to turn the original rust into useful component and then slower the corrosion process growth. It guarantees the anticorrosion processes on the safe and courteous, clean and environment friendly conditions.

Specifications

Adhesive strength                            9.7Mpa

Impact resistance                             ≥50kg•cm

Temperature variation                         -40------+180℃

Wear resistance（700g/500r）                  10mg

Acid resistance 30%H₂SO₄ or 15%HCI, 30d        no rust no bubbles no peel

Alkali resistance 40%NaOH, 30d                 no rust no bubbles no peel

Salt resistance 60g/L, 30d                       no rust no bubbles no peel

Salt spray resistance 1000h                      no rust no bubbles no peel

Oil resistance 0# diesel Crude oil 30d              no rust no bubbles no peel

Data of performance

Color                        Multiple colors as customers’ need

Luster                        half glazed

Density                       1.05g/cm³

Volume solid content            79%±2%

VOC                         ≤172g/L

Recommended dry film thickness   50-100μm

Theoretical coverage             0.07kg/sqm (calculated by the above solids percentage and dry film thickness of 50 microns)

Practical coverage                Allow appropriate loss rate

Dry time                       1-3h

Overcoating interval              min:3h, max: 28h

Overcoating method              Airless spray, Air spray, Brush, Roller

Flash point                      58℃

Recommend procedures                        

Application scopes         The anticorrosion of petroleum, chemical, transportation, metallurgy, electric power, construction and other areas.

Shelf life         10 months (Indoor with dry and cool conditions)

Packing                    20kg/bucket. 25kg/bucket

Production area            Minhang District, City of Shanghai (21% of raw materials imported from SWD US)

Security                   To apply this product must be accordance with the relevant national regulation of sanitation, safety and environment. Avoid contacting the wet coating.

Global applicability         Our company aims to provide worldwide customers the same coatings, but sometimes, some small adjustments are made to satisfy each region conditions and international norms, in this case, an alternative product data will be provided.

 Integrity declaration         Our company guarantees the reality of the listed data, due to the diversity and variability of the application environment, please test and verify it before use. We don’t take any other responsibilities except the coating quality self and reserve the right of modification the listed data without prior notice.