| Product description : |
| Non-gravity double shafts blade mixer features fierce, high efficiency, short mix time ( 1 to 3 minutes) and more than 95% of eveness for 1:1000 proportion. Two agitating axes reversely rotate at the same speed within horizontal cylinder. The special angle laid on the axis ensures material can cast to three directions including radial, loop and axial, forming a compound circle to achieve uniform mixing in the short time. | A、Mixing Effect
Despite the materials are different in proportion and diameter, it can achieve a good mix effect under the quick and fierce seethe and cast of staggered agitating blades. |
|
| B、Crash Device
Crushing device is needed when the material agglomerating. “Crushing Stick” with triangle tooth enclosure maintains high rotating speed of over 1400rpm, which smashes and depolymerizes the agglomerating materials in the material weightlessness area. |
|
| C、Discharging Mode
The materials are usually discharged by pneumatic (manual) flap valve. The arc valve can be embedded tightly into the cylinder and be parallelized with inside cylinder wall without material deposit and mixing dead angle. The standard product can be classified into small door and large door that opens to the side of cylinder, delivering clean and quick material charging and little residue. |
|
| D、Double Layer Blade
To decrease the replacement costs of easily damaged parts, the paddle blade can be shaped as 2-blade type, on whose base underlaid a movable little blade which can be changed directly, economically and quickly. |
|
| E、The Gap Between Blade and Cylinder
The gap between paddle blade and cylinder wall directly affects the mix result and the material residue within the mixer after discharging materials; the gap of our products is in range of 3 to 5mm. |
| | | | F、20 Cubic Meters Total Volume
This series mixer can conduct complete volume of 203 m at the most. It is significantly different from the general specification in terms of transmission form of large scale device and the base of mixer. |
|
|
| |
Model Project | Total Volume (M³) | Loads coefficient | Electrical machiney power (KW) | Size(mm)× Max-diameter ×High | Equipment weight (kg) | WZ-0.05 | 0.05 | 0.4-0.6 | 1.5 | 1290×660×837 | 230 | WZ-0.2 | 0.2 | 0.4-0.6 | 4 | 1124×1110×720 | 260 | WZ-0.4 | 0.4 | 0.4-0.6 | 4 | 1400×1250×1030 | 450 | WZ-0.5 | 0.5 | 0.4-0.6 | 7.5 | 1450×1500×950 | 800 | WZ-1 | 1 | 0.4-0.6 | 11 | 1800×1800×1350 | 1150 | WZ-1.5 | 1.5 | 0.4-0.6 | 15 | 1850×1950×1180 | 1500 | WZ-2 | 2 | 0.4-0.6 | 18.5 | 2200×2400×1600 | 2800 | WZ-2.5 | 2.5 | 0.4-0.6 | 22 | 2300×2300×1620 | 4200 | WZ-4 | 4 | 0.4-0.6 | 22 | 2680×2400×1850 | 4500 | WZ-5 | 5 | 0.4-0.6 | 37 | 2950×3050×2040 | 6000 | WZ-6 | 6 | 0.4-0.6 | 45 | 3050×3250×2100 | 7000 | WZ-10 | 10 | 0.4-0.6 | 55 | 3550×3150×2400 | 8000 | WZ-12 | 12 | 0.4-0.6 | 55 | 4695×3180×2500 | 10500 | WZ-15 | 15 | 0.4-0.6 | 55 | 4180×3960×2600 | 10000 | WZ-20 | 20 | 0.4-0.6 | 75 | 5700×3700×2500 | 13000 |
|
|
